About Your Projector; Remote Control - Panasonic PT-EX12KU Operating Instructions Manual

About your projector

Remote control

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(1) Remote control signal emitters
(2) Remote control indicator
Flashes when you press a button on the remote control.
(3) <LIGHT> button
Press once to light the control buttons for ten seconds.
(18)
(4) Power <POWER ON> button
Starts projection when the main power switch on the projector is set to
(19)
standby mode.
(20) (5) <SHUTTER> button
Opens and closes the shutter. (
(7) (6) <MENU> button
Displays the menu screen. (
(21)
(7) ▲▼◀▶ buttons
(22)
Move the cursor on the on-screen menu and adjust the settings of the menu.
(23)
Also move the image vertically and horizontally in the digital zoom mode or the real mode.
(8) <LENS SHIFT> button
Slides the lens vertically and horizontally to move the position of the projected image
vertically and horizontally. (
(24)
(9) <FOCUS> button
Adjusts the focus. (

(10) <ZOOM> button
Adjusts the zoom of the lens. (
(11) <FREEZE> button
Temporarily freezes the projected image. (
(12) <D.ZOOM> button
Turns on the digital zoom mode.
(13) <P-TIMER> button
Counts and displays the time elapsed from the press of the button or displays a countdown
from the set time when you press the <P-TIMER> button. (
(14) <KEYSTONE> button
Corrects the keystone effect. (
(15) <INFO.> button
Displays the state of signals during projection, and current settings. (
(16) <ON>/<OFF> switch
(25)
Set to <ON> when using the remote control.
Set to <OFF> when not using the remote control for a long period.
(17) Wired remote control terminal
When the remote control is used as a wired remote control, connect this terminal to the
<REMOTE IN> terminal on the projector.
The remote control requires batteries. (
(18) Power <STANDBY> button
Sets the projector to the standby mode when the main power switch on the projector is set
to and in the projecting mode.
(19) <SCREEN> button
Selects the screen size.
If you press the button for at least five seconds, the settings of the [Screen] menu return to
the factory default settings. (
(20) <AUTO PC ADJ.> button
Automatically adjusts tracking, total number of dots, horizontal shift, and vertical shift.
( page 56)

(21) <ENTER> button
Selects an item indicated by the cursor on the on-screen menu.
Also used to enlarge or reduce the image in the digital zoom mode. (
(22) <IMAGE ADJUST> button
Displays the [Image adjust] menu to adjust the image. (
(23) <IMAGE SELECT> button
Selects the mode from [Image select]. (
(24) <INPUT 1> - <INPUT 4> buttons
Selects the input signal to project. (
(25) Number (<0> - <9>) buttons
Used to enter PIN codes and remote control numbers.
About your projector
page 47)

page 50)

page 45)

page 46)
page 46)

page 47)

page 48)

page 24)

page 49)

page 48)

page 47)

and in the
page 49)

page 49)

page 50)

page 49)

ENGLISH - 19