Air Filter - Panasonic PT-EX12KU Operating Instructions Manual

■ Air filter

■
Clean the air filter in the following cases.
■
z When the replacement message is displayed and the filter indicator <WARNING FILTER> lights up due to
a blockage.
■
z The temperature inside the projector becomes high and the temperature indicator <WARNING TEMP.>
lights, causing the projector turn off, due to a blockage. (When the power if turned off, the temperature
indicator <WARNING TEMP.> and standby indicator <STANDBY> flashes.)
1) Slide the air filter cover.
■
z Pull and slide the air filter cover in the direction shown by the arrow.
■
z The top part of the air filter appears.
2) Remove the air filter.
■
z Hold the grip of the air filter to pull up.
3) Clean the air filter.
■
z Removing the dust from the air filter
(i) Remove the dust from the air filter using a vacuum or other cleaner.
•■If the dust persists after cleaning with a vacuum, wash the air filter in water.
■
z Washing the air filter
(i) Soak the air filter in water or warm water and rinse it lightly.
•■Do not use materials such as blushes or detergent.
•■When you rinse the air filter, hold the frame and avoid excessive force on the filter part.
Maintenance/replacement
ENGLISH - 93