[System] - Panasonic PT-EX12KU Operating Instructions Manual

[System]

[System] is displayed below the sub menu.
1) Press ▲▼ to select [System] below
the sub menu and press the <ENTER>
button.
■
z The sub menu 2 is displayed.
2) Press ▲▼ to select an item and press
the <ENTER> button.
z Press ◀ to return to the sub menu. ■
■ For computer input ■
When there is no input signal
compatible with the signal from
a connected computer on the
projector, the automatic PC
adjustment function works and
[Auto]
[Auto] is displayed on the system.
If images are not being correctly
projected, manually adjust the
settings to suit your computer and
register in [Store].
There is no input signal from the
— computer.
Check the connections.
[Mode 1] - Displays the mode registered with
[Mode 10] [Store] in [PC adjust].
■ For video and S-video input ■
The projector automatically selects
[Auto]
the color system of the input signal.
This is a list of supported color
[PAL]/ systems. The Japanese color
[SECAM]/ system is NTSC. When the quality
[NTSC]/ of the input signal is poor (irregular
[NTSC4.43]/ color, absence of color etc.), and
[PAL-M]/ the color system is not selected
[PAL-N] even when [Auto] is set, select
[NTSC].
■ For component input ■
The projector automatically selects
[Auto] the scanning method of the input
signal.
Component
video
scanning
methods When video is not being played
([480p], back correctly, select the correct
[576p], [720p], scanning method from the menu.
[480i], [576i],
[1035i], [1080i],
[1080p])
[Input] menu
ENGLISH - 55