Setting Up; Projection Method; Parts For Ceiling Mount (Optional) - Panasonic PT-VW435NE Operating Instructions Manual

Setting up

Projection method

You can use the projector with any of the following 4 projection methods. To set the desired method in the projector.
Setting on a desk/floor and
J
projecting forward
Menu setting* 1
Ceiling Off
Rear Off
Mounting on the ceiling and
J
projecting from rear
(Using translucent screen)
Menu setting*
1
Ceiling On
Rear On
*1 : For details about the menu setting, please refer to the [Screen] menu → [Ceiling] and [Rear]. (

Parts for ceiling mount (Optional)

You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKV100H: for high
ceiling, ET-PKV100S: for low ceiling), and the optional projector mount base ET-PKV200B.
Use only the ceiling mount brackets specified for this projector.
z
Refer to the installation manual for the ceiling mount bracket when you install the bracket and the projector.
z
Attention
To ensure projector performance and security, installation of the ceiling mount bracket must be carried by your
z
dealer or a qualified technician.
Mounting on the ceiling and
J
projecting forward
Menu setting* 1
Ceiling On
Rear Off
Setting on a desk/floor and
J
projecting from rear
(Using translucent screen)
Menu setting*
1
Ceiling Off
Rear On
page 54)
Æ
25
ENGLISH -