[Test Pattern]; [Factory Default] - Panasonic PT-EX12KU Operating Instructions Manual

[Setting] menu
■ [Restart] ■
Restarts the count-up or countdown that was
paused using [Stop].
1) Select [Restart], and press the
<ENTER> button.
■
z The menu screen is cleared and the timer is
displayed.
■ [Reset] ■
Resets the counted time during operation.
1) Select [Reset], and press the <ENTER>
button.
■
z The count-up is returned to "000:00" and the
countdown is returned to the time set on the
timer.
■ [Exit] ■
Exits the presentation timer during operation.
1) Select [Exit], and press the <ENTER>
button.
■
z The timer ends, and the screen display returns
to the sub menu.
Note
■
z You can also use [P-timer] by pressing the
<P-TIMER> button on the remote control.

[Test pattern]

1) Press ▲▼ to select [Test pattern].
2) Press the <ENTER> button.
■
z The sub menu 2 is displayed.
3) Press ▲▼ to select an item and press
the <ENTER> button.
■
z The test pattern and the test pattern name are
displayed.
■
z While the test pattern name is displayed, press
▲▼ to go backwards and forwards between
test patterns.
[Color]
[Gradation 1], [Gradation 2],
[Gradation 3], [Gradation 4]
[All white]
[All black]
[Cross]
84 - ENGLISH
Displays the test
pattern.
Note
■
z While the test pattern is displayed, press the
<ENTER> button or the <MENU> button to return
to the menu screen.
■
z Even while the test pattern is displayed, the zoom,
focus, lens shift, shutter, and power off functions
take priority.
■
z When the zoom, focus, or lens shift operation has
finished, the projector returns to the test pattern.

[Factory default]

Returns settings other than the following to the factory
default settings.
■
z [Logo PIN code lock]
■
z [PIN code lock]
■
z [Filter counter] (All items)
■
z The logo registered using the "Logo Transfer
Software"
1) Press ▲▼ to select [Factory default].
2) Press the <ENTER> button.
■
z A screen for confirming whether to restore the
default setting is displayed.
3) Select [Yes], and press the <ENTER>
button.
■
z The confirmation screen is displayed.
4) Select [Yes], and press the <ENTER>
button.
Note
■
z When you initialize the settings, all settings you
have made are lost, and settings are restored to
the factory default settings.