Setting up
Setting up
Projection method
You can project images vertically and diagonally. You can select rear (
menu. Select the projection method appropriate to the environment.
■ Mounting on the ceiling and
■
projecting forward
Menu item
[Ceiling]
[Rear]
■ Mounting on the ceiling and
■
projecting from rear
(Using the translucent screen)
Menu item
[Ceiling]
[Rear]
Attention
■
z To get a high picture quality, set up the screen in a location that is, as far as possible, not directly affected by
natural light or electric light. Draw the curtains or blinds and turn off the lights.
■
z When setting up the projector with tilt, do not use the projector at an inclination angle that exceeds ±10°
vertically to the horizontal plane. Installing the projector at an inclination angle that exceeds this value may
reduce the component life and result in malfunctions.
34 - ENGLISH
Setting
[On]
[Off]
Setting
[On]
[On]
10°
10°
10°
page 68) or ceiling (
■ Setting on a desk/floor and
■
projecting from rear
(Using the translucent screen)
Menu item
[Ceiling]
[Rear]
■ Setting on a desk/floor and
■
projecting forward
Menu item
[Ceiling]
[Rear]
10°
10°
10°
page 68) from the
Setting
[Off]
[On]
Setting
[Off]
[Off]