Interface Menu - Oki C130n Instruction Manual

Interface Menu

With this menu, interface settings can be specified.
The printer must be rebooted after any setting in the ETHERNET menu (for
example, the TCP/IP address) is changed.
Therefore, the following message appears when the configuration menu is
exited (the + key is repeatedly pressed) after a setting has been changed.
Select YES, and then press the Enter key to reboot the printer.
Otherwise, turn off the printer, and then turn the printer on again after a few
seconds.
Interface Menu Tree
"
ETHERNET
> TCP/IP
- ENABLE
- IPV4
• DHCP/BOOTP
• IPV4 ADDRESS
• DEFAU7LT ROUTER
• SUBNET MASK
• ENABLE AUTO IP
- PV6
> IP SERVICES
- ENABLE HTTP
- DISABLE FILTERS
- DISABLE IPSEC
> IPX/SPX
- FRAME TYPE
> ETHERNET SPEED
> DISABLE 802.1X
> PS PROROCOL
> USB
- ENABLE
- JOB TIMEOUT
41 - C130n User's Guide