Selecting Driver Options/Defaults - Oki C130n Instruction Manual

Selecting Driver Options/Defaults

Before you start working with your printer, you need to verify/change the
default driver settings. Also, if you have options installed, you should activate
them in the driver.
1
Choose the driver's properties as follows:
–
Windows Server 2008/Vista
From the Start menu, click Control Panel > Hardware and Sound >
Printers to open the Printers directory. Right-click the icon for this
printer, and then click Properties.
–
Windows XP/Server 2003
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the icon for this printer and
choose Properties.
–
Windows 2000
From the Start menu, choose Settings > Printers to display the
Printers directory. Right-click the icon for this printer and choose
Properties.
2
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3
Select the Configure tab.
4
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
5
Click Refresh to automatically configure installed options.
Note The Refresh is available only if bi-directional communication is
6
From the Device Options list, select an option, then select Enable or
Disable from the Settings menu.
7
Click Apply.
8
Select the General tab.
9
Click Printing Preferences.
The Printing Preference dialog box appears.
10
Select the default settings for your printer, such as the default media
format you use, on the appropriate tabs.
11
Click Apply.
12
Click OK twice.
available with the printer; otherwise it is grayed out.
17 - C130n User's Guide