Printable Area; Page Margins - Oki C130n Instruction Manual

Printable Area

The printable area on all media sizes is up to 4.2 mm (0.165") from the edges
of the media.
Each media size has a specific printable area (the maximum area on which
the machine can print clearly and without distortion).
This area is subject to both hardware limits (the physical media size and the
margins required by the machine) and software constraints (the amount of
memory available for the full-page frame buffer). The printable area for all
media sizes is the page size minus 4.2 mm (0.165") from all edges of the
media.
Note When printing in color on legal-size media, the following limitations
apply.
•
•

Page Margins

Margins are set through your application. Some applications allow you to set
custom page sizes and margins while others have only standard page sizes
and margins from which to choose. If you choose a standard format, you may
lose part of your image (due to printable area constraints). If you can
custom-size your page in your application, use those sizes given for the
printable area for optimum results.
a=4.0 mm (0.157")
The printable area is 339.6 (13.4") mm from the leading edge of
the paper. (However, there is a non-printable area up to 4.2 mm
(0.165") from the leading edge.)
The bottom margin is 16.0 mm (0.63").
59 - C130n User's Guide