Oki C130n User Manual
  1. Manuals
  2. Brands
  3. Oki Manuals
  4. Printer
  5. C130n
  6. User manual
Oki C130n User Manual

Oki C130n User Manual

Hide thumbs Also See for C130n:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual, Instruction Manual
C130n
User's Guide
59318601
my.okidata.com
Downloaded From ManualsPrinter.com Manuals

Advertisement

Table of Contents
loading

Related Manuals for Oki C130n

Summary of Contents for Oki C130n

  • Page 1 C130n User’s Guide 59318601 my.okidata.com Downloaded From ManualsPrinter.com Manuals...

  • Page 2: Trademark Information

    The most up-to-date drivers and manuals are available from the web site: http://www.okiprintingsolutions.com. Trademark Information Oki is a registered trademark of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. Hewlett-Packard, HP, and LaserJet are registered trademarks of Hewlett-Packard Company.

  • Page 3: Emergency First Aid

    ! If it gets into the eyes, flush with large amounts of water for at least 15 minutes keeping eyelids open. Seek medical attention. Spillage Spillages should be treated with cold water and soap to help reduce risk of staining skin or clothing. 3 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 4: Table Of Contents

    3 Using the Status Monitor (Windows Only) ....25 Working with the Status Monitor ............26 Introduction ..................26 Operating Environment ..............26 4 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 5 6 Replacing Consumables ......72 Toner Cartridges ................... 73 General Information ................. 73 Storing and Handling Toner Cartridges ........... 73 5 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 6 9 Installing Accessories ......157 Introduction ..................158 Tray 2 ....................158 Installing Tray 2................158 Duplex Option ..................162 Installing the Duplexing Attachment..........162 Installing the Duplexer ..............165 6 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 7 10 Specifications ........168 Printer Specifications ................. 169 Consumable Life Expectancy Chart............ 172 User-Replaceable Consumables ........... 172 Service-Replaceable Consumables ..........172 7 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 8: Introduction

    Introduction 8 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 9: Getting Acquainted With Your Printer

    Getting Acquainted with Your Printer Space Requirements To ensure easy operation, consumable replacement and maintenance, adhere to the recommended space requirements detailed below. Front View 496 mm (19.5") 396 mm (15.6") 100 mm (3.9") 9 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 10: Side View

    Side View with Options (Second Tray & Duplpexer) 130 mm 157 mm (5.1") (6.2") 435 mm (17.1") 100 mm 100 mm (3.9") (3.9") 922 mm (36.3") Note The option appears shaded in the above illustrations. 10 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 11: Printer Parts

    Front View 1—Output tray 2—Control panel 3—Front cover 4—Dust cover 5—Tray 1 (Multipurpose tray) 6—Top cover 7—Fuser unit 8—Fuser separator levers 9—Fuser cover lever 10—Imaging cartridge 11—Toner cartridge 11 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 12 Rear View 1—Power switch 2—Power connection 3—USB port 4—10Base-T/100Base-TX (IEEE 802.3) Ethernet Interface port 12 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 13: Printer Cd

    Macintosh OS X (10.2.8/10.3/10.4/ These files are required in order to 10.5) use the printer driver for each operating system. Macintosh OS X Server (10.2/10.3/ 10.4/10.5) Red Hat Linux 9.0, SuSE Linux 8.2 13 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 14: Utilities

    Status Monitor” on page 26.. Documentation Documentation Use/Benefit User’s Guide (this manual) This manual provides details on general daily operations, such as using the drivers and control panel and replacing consumables. 14 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 15: System Requirements

    Approximately 128 MB of free hard disk space for image processing " 128 MB or more " CD/DVD-ROM drive " I/O interface – 10Base-T/100Base-TX (IEEE 802.3) Ethernet interface port – USB Revision 2.0 and USB Revision 1.1 compliant port. 15 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 16: Using The Windows Printer Drivers

    Using the Windows Printer Drivers 16 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 17: Selecting Driver Options/Defaults

    Click Printing Preferences. The Printing Preference dialog box appears. Select the default settings for your printer, such as the default media format you use, on the appropriate tabs. Click Apply. Click OK twice. 17 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 18: Uninstalling The Printer Driver

    Uninstall Printer Driver. When the Uninstall dialog box appears, select the name of the driver to be deleted, and then click the Uninstall button. Click Uninstall. Click OK, and restart your computer. 18 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 19: Displaying Printer Driver Settings

    Right-click the icon for this printer and choose Printing Preferences. Windows 2000 From the Start menu, point to Settings > Printers to display the Printers directory. Right-click the icon for this printer and choose Printing Preferences. 19 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 20: Using The Postscript And Pcl Printer Drivers

    When this button is clicked, it changes to the Printer View button. Note This button does not appear on the Quality tab. Quality View Click the button to display a sample of the settings selected in the Quality tab. 20 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 21: Advanced Tab (Postscript Printer Driver Only)

    " Specify whether or not the error messages of a print job are printed " Print a mirror image " Specify whether or not the application can directly output PostScript data 21 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 22: Basic Tab

    The Cover Page Tab allows you to " Print front and back cover pages and separator pages " Specify the paper tray that contains the paper for the front and back cover pages and separator pages 22 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 23: Watermark/Overlay Tab

    Switch between color and grayscale printing " Specify the printer color settings (Quick Color) " Specify the resolution for the printout " Specify the amount of details in graphic patterns (PCL printer driver only) 23 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 24: Other Tab

    Server: Windows Server 2008/Server 2003/XP/2000/Vista Client: Windows Server 2008/Server 2003/XP/2000/Vista " Functions with limitations applied Booklet, Skip Blank Pages, Front Cover Page, Back Cover Page, Separator Page, Create Overlay, Print Overlay, Watermark 24 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 25: Using The Status Monitor (Windows Only)

    Using the Status Monitor (Windows Only) 25 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 26: Working With The Status Monitor

    Select your language, then click Next. Click I Agree to accept the terms of the software license agreement. Under Driver Setup, click Install Status Monitor. The OKI C130n Status Monitor InstallShield Wizard opens. Follow the on-screen instructions to complete the installation. Operating Environment The Status Monitor can be used on computers running Windows –...

  • Page 27: Recognizing Status Monitor Alerts

    When the Status Monitor notifies you of a printing problem, double-click its icon on the Windows task bar to open the Status Monitor. The Status Monitor identifies what type of error has occurred. 27 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 28: Closing The Status Monitor

    Closing the Status Monitor Click Close to close the Status Monitor window. T o exit Status Monitor, right-click the Status Monitor icon in the taskbar, and then click Exit. 28 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 29: Printer Control Panel & Configuration Menu

    Printer Control Panel & Configuration Menu 29 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 30: About The Control Panel

    The printer is not ready to The printer is ready to accept data. accept data. Ready Normal. The printer requires operator attention (usually TTENTION TTENTION accompanied by a status message in the message window.) 30 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 31 3. Press the Menu Select key. The print job(s) is (are) cancelled. " Enters the menu system NTER " Moves down in the menu structure " Selects the displayed menu choice 31 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 32: Toner Supply Indicators

    For details on the default passwords, refer to “SYSTEM DEFAULT” on page 46. PRINT MENU With this menu, printer information, such as the configuration page and the demo page, can be printed. 32 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 33 Prints the demo page. Note The amounts remaining for the supplies status and coverage information displayed using the statistics page may be different from the actual amounts and should be used only as reference. 33 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 34: Paper Menu

    " ORIENTATION " PAGE RECOVERY Note * This menu item appears only if the duplex option is installed. ** These menu items appear only if an optional second tray is installed. 34 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 35 Select the setting for the type of paper loaded into Tray 1. TRAY2 MEDIA Settings LETTER/ SIZE The default setting for North America is LETTER. The default setting for all other regions is A4. 35 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 36 On the model for North America, the settings appear in inches and the menu item appears as LENGTH(IN). On the models for all other regions, the settings appear in millimeters and the menu item appears as LENGTH(MM). 36 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 37 Select whether or not the page is printed again after recovering from a paper misfeed. If ON is selected, the page that was misfed is printed again. If OFF is selected, printing continues with the next page without printing the misfed page. 37 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 38: Quality Menu

    > BLACK > CYAN > MAGENTA > YELLOW > REMOVE ALL " TONER OUT ACTION " AIDC > REQUEST AIDC > MODE " P/H CLEANUP " ECONOMY PRINT " DUPLEX SPEED 38 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 39 82. TONER Settings STOP/CONTINUE If STOP is selected, printing stops when the toner cartridge is empty. ACTION If CONTINUE is selected, printing continues even if the toner cartridge is empty. 39 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 40 If SPEED is selected, the print speed has priority; however, the print quality may decrease. If QUALITY is selected, the print quality has priority; therefore, the print speed will decrease while the print quality may increase. 40 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 41 > IP SERVICES - ENABLE HTTP - DISABLE FILTERS - DISABLE IPSEC > IPX/SPX - FRAME TYPE > ETHERNET SPEED > DISABLE 802.1X > PS PROROCOL > USB - ENABLE - JOB TIMEOUT 41 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 42 /SECURITY /CONFIG /ENABLE is set to , the administrator password must be entered to display this menu. For details on the default administrator password, refer to “SYSTEM DEFAULT” on page 46. 42 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 43 Use the , and keys to specify the value. SUBNET Settings 000.000.000.000 MASK Specify the subnet mask for the network. Use the , and keys to specify the value. 43 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 44 If YES is selected, filter is enabled. If NO is selected, filter is disabled. DISABLE Settings YES/ IPSEC If YES is selected, IPsec is enabled. If NO is selected, IPsec is disabled. 44 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 45 If NO is selected, USB is disabled. Settings -999 TIMEOUT Specify the length of time (in seconds) until the print job being received is timed out when USB is being used. 45 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 46: System Default

    DATE & TIME " ENERGY SAVER " SECURITY > CONFIG - ENABLE " FORMAT > FLASH - SET USER PASSWD " RESTORE/SAVE > RESTORE FACTORY > SAVE CUSTOM > RESTORE CUSTOM 46 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 47: System Default Menu

    , GRAYSCALE MODE Specify whether printing is in full color or grayscale. Note The color mode setting specified from the printer driver has priority over the setting specified for this menu item. 47 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 48 “PRINT MENU” on page 32. POINT Settings 400-1200-99975 SIZE Specify the outline font size in the PCL language. SYMBOL Specify the symbol set used with the PCL language. The default setting is PC8. 48 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 49 The specified password is applied only if MAIN MENU/SYSTEM DEFAULT/SECRITY/CONFIG/ENABLE is set to ON. The password can contain a maximum of 16 characters. Note Empty passwords are not allowed. 49 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 50: Service Menu

    If YES is selected, the menu items revert to the previously saved settings. SERVICE MENU With this menu, the service representative can adjust the printer and perform maintenance operations. This menu cannot be accessed by the user. 50 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 51: Language Menu

    PORTUGUESE, DUTCH, The default setting is English. CZECH, JAPANESE, POLISH The language selections appear in the message window in the corresponding language. For GERMAN DEUTSCH example, appears as 51 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 52: Media Handling

    Media Handling 52 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 53: Print Media

    The maximum size is 8.5 x 11.7 inch (216.0 x 297.0 mm). Note For custom sizes, use the printer driver to specify the settings within the ranges shown in the above table. 53 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 54: Media Types

    Cold-water-transfer paper " Pressure sensitive " Designed specifically for inkjet printers (such as superfine paper, glossy film, and postcards) " Already been printed on by another printer, copier, or fax machine 54 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 55: Thick Stock

    91 to 209 g/m² (25 to 55.9 lb) Duplexing Not supported DO NOT use thick stock that is " Mixed with any other media in Tray 1 (as this will cause printer misfeeding) 55 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 56: Labels

    Up to 50 label sheets, depending on their thickness Tray 2 Not supported Orientation Face up Driver Labels Media Type Duplexing Not supported Use label sheets that are " Recommended for laser printers 56 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 57: Letterhead Stationery

    Up to 50 postcards, depending on their thickness Tray 2 Not supported Orientation Face up Driver Postcard Media Type Duplexing Not supported Use postcards that are " Approved for laser printers DO NOT use postcards that are 57 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 58 Designed for inkjet printers " Precut or perforated " Preprinted or multicolored Note If the postcard is warped, press on the warped area before putting it in Tray 1. " Folded or wrinkled 58 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 59: Printable Area

    If you choose a standard format, you may lose part of your image (due to printable area constraints). If you can custom-size your page in your application, use those sizes given for the printable area for optimum results. 59 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 60: Loading Media

    Do not mix media of different types and sizes, as this will cause media misfeeds. Tray 1 (Multipurpose Tray) For details on the types and sizes of media that can be printed from Tray 1, refer to “Print Media” on page 53. 60 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 61 Loading Plain Paper Remove the dust cover from Tray 1. Slide the media guides to provide more space between them. Load the paper face up in the tray. 61 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 62 (80 g/m [21 lb]) of plain paper can be loaded into the tray at one time. Slide the media guides against the edges of the paper. Reattach the dust cover. 62 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 63: Other Media

    Label, or Thick Stock) in the driver for optimum print quality. Loading Labels/Postcard/Thick Stock and Letterhead Remove the dust cover from Tray 1. Remove any media from the tray. Slide the media guides to provide more space between them. 63 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 64 Load the media face up in the tray. Note Up to 50 sheets can be loaded into the tray at one time. Slide the media guides against the edges of the media. Reattach the dust cover. 64 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 65: Tray 2

    Only Letter or A4 plain paper can be loaded in Tray 2. Loading Plain Paper Pull out Tray 2 as far as possible. Lift up Tray 2 to remove it. Remove the lid from Tray 2. 65 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 66 Load the paper face up in the tray. Note Do not load above the 100% line. Up to 500 sheets (80 g/m [21 lb]) of plain paper can be loaded into the tray at one time. 66 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 67 Reattach the lid to Tray 2. Reinsert Tray 2 into the printer. 67 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 68: Duplexing

    If “Short Edge” is selected, the pages will be laid out to flip at the top. If “Long Edge” is selected, the pages will be laid out to flip at the sides. 68 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 69 Load plain paper into the tray. From the printer driver, specify the layout for duplex printing. Click OK. Note With autoduplexing, the back side is printed first, and then the front side is printed. 69 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 70: Output Tray

    This tray has a capacity of approximately 100 sheets (A4/Letter) of 80 g/m (21 lb) paper. Note If the media is stacked too high in the output tray, your printer may experience media misfeeds, excessive media curl, or static buildup. 70 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 71: Media Storage

    Avoid moisture, excessive humidity, direct sunlight, excessive heat (above 35°C [95°F]), and dust. " Avoid media leaning against other objects or placing it in an upright position. Before using stored media, do a trial print and check print quality. 71 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 72: Replacing Consumables

    Replacing Consumables 72 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 73: Toner Cartridges

    If you get toner in your eyes, wash it out immediately with cool water and consult a doctor. Important! For the best results, use only genuine Oki toner cartridges. Storing and Handling Toner Cartridges " Keep toner cartridges In their packaging until you’re ready to install them.
  • Page 74 Do not hold, stand or store cartridges on their ends or turn them upside down; the toner inside the cartridges may become caked or unequally distributed. " Keep toner cartridges away from salty air and corrosive gases such as aerosols. 74 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 75: Replacing A Toner Cartridge

    /QUALITY MENU is set to CONTINUE, the message X TONER OUT appears. Check the message window to see which color toner is empty. Perform the operation described below to automatically rotate the 75 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 76 NTER The display then changes to OPEN DOOR AND REPLACE X TINER Open the front cover. Note Before opening the front cover, open Tray 1 if it is not already open 76 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 77 Remove the toner cartridge CAUTION Do not manually rotate the toner cartridge carousel. In addition, do not rotate the carousel with force, otherwise it may be damaged. 77 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 78 Unpack the new toner cartridge. Shake the cartridge horizontally a few times to distribute the toner. Note Make sure that the toner roller cover is securely attached before shaking the toner cartridge. 78 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 79 Remove the cover from the toner roller. CAUTION Do not touch or scratch the toner roller! 79 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 80 Note Before inserting the toner cartridge, make sure that the color of the toner cartridge to be installed is the same as the label on the toner cartridge carousel. 80 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 81 (less than 2 minutes) after the toner cartridge has been replaced. If you open the top or front cover before the message IDLE appears, the printer stops and repeats the calibration cycle. 81 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 82: Replacing All Toner Cartridges At The Same Time

    QUALITY MENU REPLACE TONER REPLACE TONER NTER BLACK REPLACE TONER REMOVE ALL REMOVE ALL NTER REMOVE ALL *YES NTER IS SELECTED Then the display changes to OPEN DOOR AND REMOVE M TONER 82 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 83 If you open the top or front cover before the printer is reset, the calibration stops, then starts over again after the cover is closed. Press the key three times to exit the configuration menu. 83 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 84: Imaging Cartridges

    Imaging Cartridges Replacing the Imaging Cartridge Important! When replacing an imaging cartridge, use only a genuine Oki imaging cartridge for your specific printer type. Open the top cover. Note If there is paper in the output tray, remove it, and then fold up the output tray before opening the top cover.
  • Page 85 Do not touch the PC drum and the transfer belt on the imaging cartridge. Slowly insert the new imaging cartridge vertically, and then push it slightly down toward you to finish installing the imaging cartridge. 85 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 86 (less than 2 minutes) after the imaging cartridge has been replaced. If you open the top cover before the message IDLE appears, the printer stops and repeats the calibration cycle. 86 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 87: The Fuser Unit

    The Fuser Unit Replacing the Fuser Unit Important! For optimum print quality and performance, use only a genuine Oki fuser unit for your specific printer type. Turn off the printer and disconnect the power cord. WARNING! There are extremely hot parts within the printer. Before replacing...
  • Page 88 Push the blue handles back as far as possible. Grab the blue handles and lift the fuser unit to remove it. 88 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 89 Important! Do not touch the matching connectors of the fuser unit and the machine. Prepare a new fuser unit. 89 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 90 Pull the fuser separator levers forward as far as pos- sible. Remove the fuser separator material, and then return the fuser separator levers to their original positions. 90 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 91 Be careful not to touch the paper exit sensor and the surface of the fuser roller in the fuser unit. While lifting the fuser unit with the blue handles (one on each side), vertically insert the fuser unit. 91 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 92 Important! Do not touch the paper exit sensor on the fuser unit. Important! Do not touch the matching connectors of the fuser unit and the machine. 92 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 93 After the fuser unit is firmly installed, flip the blue handles down toward you. Carefully close the top cover. Reconnect the power cord, and turn on the printer. 93 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 94: Maintaining The Printer

    Maintaining the Printer 94 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 95: Maintaining The Printer

    " Avoid using abrasive or corrosive solutions or solutions that contain solvents (such as alcohol and benzene) to clean the printer. 95 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 96 Keep media in the output tray at a minimum level. If the media is stocked too high, your printer may experience media misfeeds and excessive media curl. " Keep the printer level to avoid toner spillage. 96 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 97 If you get toner in your eyes, wash it out immediately with cool water and consult a doctor. " Make sure any parts removed during cleaning are replaced before you plug in the printer. 97 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 98: Cleaning The Printer

    However, be sure to turn on the printer when cleaning the print head window. Cleaning the Exterior Control Panel EADY EADY TTENTION TTENTION OTATE OTATE ONER ONER ANCEL ANCEL Ventilation Grill 98 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 99: Cleaning The Interior

    Cleaning the Media Feed Roller Open the top cover. Note If there is paper in the output tray, remove it, and then fold up the output tray before opening the top cover. 99 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 100 Grab the handle and lift it up slightly to the back, and then slowly pull the imaging cartridge out vertically. 100 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 101 Do not leave the imaging cartridge removed for more than 15 minutes, and do not place the removed imaging cartridge in a location where it would be exposed to direct light (such as sunlight). 101 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 102 Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. 102 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 103 (1, bottom view). Slowly insert the imaging cartridge vertically, and then push it slightly down toward you to finish reinstalling the imaging cartridge. Carefully close the top cover. Cleaning the Print Head Window 103 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 104 Note Before opening the front cover, open Tray 1 if it is not already open. The magenta toner cartridge has been moved to the position from where it can be replaced. 104 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 105 Note When the magenta toner cartridge is removed, a gap is created within the printer so that the print head window can easily be cleaned. Important! Do not touch the contact indicated in the illustration. 105 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 106 After the toner cartridges have finished rotating, open the top cover. Grab the handle and lift it up slightly to the back, and then slowly pull the imaging cartridge out vertically. 106 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 107 Do not leave the imaging cartridge removed for more than 15 minutes, and do not place the removed imaging cartridge in a location where it would be exposed to direct light (such as sunlight). 107 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 108 Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. 108 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 109 Be careful not to touch the surface of the transfer roller (1, bottom view). Slowly insert the imaging cartridge vertically, and then push it slightly down toward you to finish reinstalling the imaging cartridge. 109 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 110 Close the top cover. After the toner cartridges have finished rotating, open the front cover. Align the shaft on each end of the toner cartridge with its holders, and then insert the cartridge. 110 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 111 Important! Do not touch the contact indicated in the illustration. Press in the magenta toner cartridge until it locks into place. 111 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 112 If the duplex option is installed, remove it. Open the outer cover of the duplex unit, then hold the duplexer against the printer and remove the screws holding it to the printer. 112 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 113 Close the duplex cover, then lift up on the bottom of the duplexer, and pull it off the printer. Remove the dust cover from Tray 1. Close Tray 1 and the output tray. 113 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 114 Lift the printer off of Tray 2 and temporarily place it on a sturdy flat surface. Clean the media feed rollers by wiping them with a soft, dry cloth. 114 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 115 If you removed the duplex option in step 1, reinstall it. Cleaning the Media Feed Rollers in the Duplex Attachment Important! Be sure to remove the duplex option before cleaning the media feed rollers for the attachment. Remove the duplexer. 115 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 116 Close the duplex cover., then lift up on the bottom of the duplexer, and pull it off the printer. 116 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 117 Remove the dust cover from Tray 1. Close Tray 1 and the output tray. Lift the printer off of the duplex attachment and temporarily place it on a sturdy flat surface. 117 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 118 Clean the media feed rollers by wiping them with a soft, dry cloth. Lift the printer and reinstall it on top of the attachment. Open the output tray and tray 1, then reattach the dust cover. Reinstall the duplexer. 118 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 119 Cleaning the Duplex Feed Rollers Open the duplex cover. Clean the feed rollers by wiping them with a soft, dry cloth. Carefully close the duplex cover. 119 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 120: Troubleshooting

    Troubleshooting 120 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 121: Introduction

    Clearing media misfeeds page 125 Solving problems with media misfeeds page 140 Solving other problems page 142 Solving problems with printing quality page 146 Status, error, and service messages page 152 121 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 122: Printing A Configuration Page

    MENU NTER MAIN MENU MAIN MENU NTER PRINT MENU PRINT MENU NTER MENU MAP PRINT MENU CONFIGURATION CONFIGURATION NTER The configuration page prints and the NTER printer goes back to IDLE. 122 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 123: Preventing Media Misfeeds

    Overfilling the trays. " Allowing the output tray to overfill (the output tray has a 100-sheet capacity—misfeeding may occur if you allow more than 100 sheets of media to accumulate at one time). 123 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 124: Understanding The Media Path

    Understanding the printer’s media path will help you locate media misfeeds. 1 Output tray 2 Imaging cartridge 3 Toner cartridge carousel 4 Tray 1 5 Tray 2 (optional) 6 Fuser unit 7 Duplex option 124 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 125: Clearing Media Misfeeds

    If, after clearing the media misfeed, the misfeed message in the control panel window persists, open and close the printer’s top cover. This should clear the misfeed message. 125 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 126: Media Misfeed Messages And Clearing Procedures

    With the second case, refer to page 126. PAPER JAM page 127 FUSER PAPER JAM page 127 EXIT PAPER JAM page 127 TRANSFER PAPER JAM TRAY2 page 135 OPEN TOP COVER PAPER JAM page 138 DUPLEX 126 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 127 Grab the handle and lift it up slightly to the back, and then slowly pull the imaging cartridge outy. 127 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 128 Do not leave the imaging cartridge removed for more than 15 minutes, and do not place the removed imaging cartridge in a location where it would be exposed to direct light (such as sunlight). 128 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 129 Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. 129 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 130 Note Remove the dust cover from Tray 1 and remove any jammed media. 130 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 131 Important! Decreased print quality may result if the surface of the transfer roller is touched. Be careful not to touch the surface of the transfer roller. 131 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 132 Return the fuser separator levers to their original positions. Slowly insert the imaging cartridge vertically, and then push it slightly down toward you to finish reinstalling the imaging cartridge. 132 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 133 Note If the media cannot be removed, instead of pulling it with extreme force, clear the media misfeed according to the procedure described in “Clearing a Media Misfeed in the Printer” on page 127. 133 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 134 Reattach the dust cover. Press the Menu Select key. 134 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 135 Pull out Tray 2 as far as possi- ble. Lift up Tray 2 to remove it. Remove any misfed paper. Note If necessary, remove the dust cover from Tray 1 and close the tray. 135 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 136 Fan the paper, and align its edges. Press down the media pressure plate to lock it into place. Load the media in Tray 2, and attach the lid. 136 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 137 Reinsert Tray 2. Open and close the top cover to clear the misfeed message. 137 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 138 138 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 139 Close the duplex cover. 139 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 140: Solving Problems With Media Misfeeds

    Do not duplex labels, thick stock, postcard, or letterheads. Media is still being Recheck the media path inside the misfed. duplex option and make sure that you have removed all of the misfed media. 140 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 141 See “Print Media” on page 53. thickness, type, etc.) is being used. The media feed roller Clean the media feed roller. is dirty. For more details, refer to “Cleaning the Media Feed Roller” on page 99. 141 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 142: Solving Other Problems

    The tray is empty. Check that at least Tray 1 is loaded print the with media, in place, and secure. configuration There is a media Clear the media misfeed. page. misfeed. 142 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 143 The job is very complex. Wait. No action needed. A toner cartridge for a Install a genuine Oki toner cartridge different region is installed approved for your specific printer. X INCORRECT displayed in the message window).
  • Page 144 Technical Support with the error information. Unsupported media (wrong Use good quality recommended media. size, thickness, type, etc.) is See “Print Media” on page 53. being used. 144 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 145 Symptom Cause Solution The date and The backup battery has Contact Technical Support. time is not reached the end of its correctly service life. maintained on the printer. 145 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 146: Solving Problems With Printing Quality

    If one or more color. be defective. is damaged, replace it. The imaging cartridge Remove the imaging cartridge and may be defective. check for damage. If it is damaged, replace it. 146 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 147 The imaging cartridge Remove the imaging cartridge and gloss of the printed may be defective. check for damage. If it is damaged, image. replace it. 147 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 148 See “Print Media” on page 53. rubbed. type, etc.) is being used. Media type is set When printing labels, postcards, thick incorrectly. stock, or letterheads, specify the appropriate media type in the printer driver. 148 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 149 Replace it with a new toner cartridge. The imaging cartridge Remove the imaging cartridge and is defective. check for damage. If it is damaged, replace it. 149 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 150 If one or more page- be defective. is damaged, replace it. to-page variation. The media is moist Remove the moist media and replace it from humidity. with new, dry media. 150 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 151 MAIN MENU/QUALITY , then MENU/AIDC/REQUEST AIDC select If the problem is not resolved, even after all of the above have been performed, contact Technical Support with the error information. 151 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 152: Status, Error, And Service Messages

    IDLE The printer is on and ready to receive data. INITIALIZING The printer is being initialized. PRINTING The printer is printing. 152 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 153: Error Messages: Warning

    The X toner cartridge Install a genuine Oki is an unapproved toner cartridge of the type. appropriate type. X MEMORY ERROR A memory error Re-install the specified occurred in the toner toner cartridge. cartridge. 153 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 154: Error Messages (Operator Call)

    Support. DUPLEX Duplex cover is open. Close the duplex cover. UNIT PANEL OPEN ERROR While updating code, an error The user should attempt the LOADING has occurred. upgrade process again. IMAGE 154 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 155 Replace the imaging incompatible with the machine cartridge with a correct one. is installed. X TONER The X toner cartridge has Replace the toner cartridge. LIFE END reached the end of its life. 155 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 156: Service Messages

    Reboot the printer. This often CALL with the item indicated “XXXX” clears the service message, XXXX in the service message. and printer operation can resume. If the problem persists, contact Technical Support. 156 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 157: Installing Accessories

    Installing Accessories 157 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 158: Introduction

    Installing Tray 2 Important! Since the imaging drum and toners are installed in the printer, be sure to keep the printer level when moving it in order to prevent accidental spills. 158 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 159 Remove the dust cover from Tray 1. Close Tray 1 and the output tray Unpack Tray 2. Note Be sure to place Tray 2 on a level surface. 159 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 160 Tray 2, making sure that the positioning pins on Tray 2 correctly fit into the holes in the bottom of the printer. Open the output tray and Tray ,1. Reattach the dust cover. 160 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 161 Insert Tray 2 into the printer and reconnect all interface cables. Reconnect the power cord, and turn on the printer. Activate Tray 2 in the Windows printer driver (Properties/Configure tab, see page 17). 161 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 162: Duplex Option

    The duplexing attachment (or optional Tray 2) must installed before the duplexer can be installed. Note The duplexing attachment cannot be used by itself; it must be used together with the duplexer. 162 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 163 Turn off the printer and discon- nect the power cord and inter- face cables. Remove the dust cover from Tray 1. 163 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 164 Open Tray 1 and the output tray, and reattach the dust cover. 164 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 165: Installing The Duplexer

    Turn off the printer and discon- nect the power cord and inter- face cables. Remove the tape affixed to the rear cover. Unpack the duplexer. 165 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 166 Important! When attaching the duplex option, attach the bottom of the option first. If the duplex option is attached incorrectly, it may be damaged. 166 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 167 Reconnect all interface cables. Reconnect the power cord, and turn on the printer. Activate the duplexer in the Windows printer driver (Properties/Configure tab, see page 17). 167 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 168: Specifications

    Specifications 168 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 169: Printer Specifications

    13.2 pages per minute for A4, Letter (plain paper) " Full color: 5.0 pages per minute for A4, Letter (plain paper) Warm-up time Avg. 45 seconds (time to return to Ready mode from Energy save mode) 169 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 170 Energy Saver Mode: 18.5 W or less Amperage 120 V: 8.4 A or less 220 to 240 V: 4.4 A or less Acoustic Noise Printing: 52 dB or less Standby: 32 dB or less 170 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...
  • Page 171 Width: 399 mm (15.8") Depth: 380 mm (14.9") Weights 13 kg (without consumables) 15 kg (with consumables) Interface USB 2.0 and USB 1.1 compliant, 10Base-T/ 100Base-TX (IEEE 802.3) Ethernet Standard memory 256 MB 171 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

  • Page 172: Consumable Life Expectancy Chart

    In addition, the life will be affected by the temperature and humidity of the operating environment. Service-Replaceable Consumables Item Average Life Expectancy Transfer roller 50,000 pages 172 - C130n User’s Guide Downloaded From ManualsPrinter.com Manuals...

Table of Contents