Oki C130n Instruction Manual page 148

Symptom
The print or color
density is uneven.
Irregular print or
mottled image
appears.
There is
insufficient fusing
or the image
comes off when
rubbed.
Cause
One or more of the
toner cartridges may
be defective or low.
The imaging cartridge
is defective.
The printer is not level. Place the printer on a flat, hard, level
The media is moist
from humidity.
Unsupported media
(wrong size, thickness,
type, etc.) is being
used.
One or more of the
toner cartridges may
be defective.
The imaging cartridge
is defective.
The media is moist
from humidity.
Unsupported media
(wrong size, thickness,
type, etc.) is being
used.
Media type is set
incorrectly.
148 - C130n User's Guide
Solution
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
surface.
Adjust the humidity in the media
storage area.
Remove the moist media and replace it
with new, dry media.
Use good quality recommended
media. See "Print Media" on page 53.
Remove the toner cartridges and check
each for damage. If one or more is
damaged, replace it.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
Remove the moist media and replace it
with new, dry media.
Use good quality recommended
media. See "Print Media" on page 53.
When printing labels, postcards, thick
stock, or letterheads, specify the
appropriate media type in the printer
driver.