Changing Parallel Interface Menu Settings
1. Press ON LINE. The printer goes off line.
2. Press and hold MENU 1/Menu 2 until you see PRINT MODE on the
display.
3. Press MENU 1/Menu 2 until PARALLEL I/F appears on the display.
4. Press ENTER.
5. Press MENU 1/Menu 2 until the item you wish to change appears (e.g., I-
PRIME).
6. Press > / RESET until the setting you wish to engage appears (e.g., ON).
7. Press ENTER. An asterisk appears to indicate the new default setting
(e.g., ON *).
8. Press ON LINE.
The printer saves the new setting and exits the menu.
226