Note All factory default values are shown in bold.
ETHERNET
IPX/SPX
(cont.)
ETHERNE
T SPEED
DISABLE
802.1X
PS
PROTOCOL
USB
ENABLE
JOB
TIMEOUT
Interface Menu
FRAME TYPE Settings
Specify the protocol used with NetWare.
Settings
AUTO, 100 FULL DUPLEX, 100 HALF DUPLEX, 10
FULL DUPLEX, 10 HALF DUPLEX
Specify the transmission speed for the network and the transmission
method for bi-directional transmission.
Settings
YES, NO
If YES is selected, IEEE802.1x function is enabled.
If NO is selected, IEEE802.1x function is disabled.
Settings
BINARY, QUOTED BINARY
Select whether PostScript jobs are received in the binary format or
the quoted format.
Settings
YES, NO
If YES is selected, USB is enabled.
If NO is selected, USB is disabled.
60
Settings
0-
Specify the length of time (in seconds) until the print job being
received is timed out when USB is being used.
45 - C130n User's Guide
AUTO, 802.2, 802.3, ETHER II,
SNAP
-999