Interface Menu - Oki C130 User Manual

INTERFACE MENU

With this menu, interface settings can be specified.
The printer must be rebooted after any setting in the ETHERNET menu (for
example, the TCP/IP address) is changed.
Therefore, the following message appears when the configuration menu is
exited (the + key is repeatedly pressed) after a setting has been changed.
Select YES, and then press the ENTER key to reboot the printer.
Otherwise, turn off the printer, and then turn the printer on again after a few
seconds.
INTERFACE MENU
ETHERNET
4-16
*
TCP/IP
IP SERVICES
ENABLE
IPV4
IPV6
ENABLE HTTP
Configuration Menu Overview
DHCP/BOOTP
IPV4 ADDRESS
DEFAULT ROUTER
SUBNET MASK
ENABLE AUTO IP
ENABLE
IDENTIFIER