Solving Other Problems; Solving Other Problems - Oki C130n Instruction Manual

Solving Other Problems

Symptom Cause
Printer The power cord is not
power is not correctly plugged into the
on. outlet.
Something is wrong with the
outlet connected to the
printer.
The power switch is not
correctly turned on (I
position).
The printer is connected to
an outlet with a voltage or
frequency that does not
match the printer
specifications.
The control One of the toner cartridges
panel may be defective.
displays
"X TONER
You printed with heavy toner
LOW "
coverage.
much sooner
than
expected.
You can't The tray is empty.
print the
configuration
There is a media
page.
misfeed.
Solution
Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
Plug another electrical appliance into
the outlet and see whether it operates
properly.
Turn the power switch off (O position),
then turn it back to the on (I position).
Use a power source with the
specifications listed in "Printer
Specifications" on page 169.
Remove the toner cartridges and check
each for damage. If one or more is
damaged, replace it.
See specifications in "Printer
Specifications" on page 169.
Check that at least Tray 1 is loaded
with media, in place, and secure.
Clear the media misfeed.
142 - C130n User's Guide