"
Dusty
"
Wet (or damp)
Note Keep media between 15% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
"
Layered
"
Adhesive
"
Folded, creased, curled, embossed, warped, or wrinkled
"
Perforated, three-hole punched, or torn
"
Too slick, too coarse, or too textured
"
Different in texture (roughness) on the front and back
"
Too thin or too thick
"
Stuck together with static electricity
"
Composed of foil or gilt; too luminous
"
Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
"
Irregularly shaped (not rectangular or not cut at right angles)
"
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
"
Acidic
"
Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Orientation Face up
Driver
Media Type
Weight
Duplexing
DO NOT use thick stock that is
"
Mixed with any other media in Tray 1 (as this will cause printer
misfeeding)
2
(24 lb bond) is referred to as thick stock. Test all
Tray 1
Up to 50 thick stock sheets, depending on
their thickness
Tray 2
Not supported
Thick 1 (91 to163 g/m
Thick 2 (164 to 209 g/m
91 to 209 g/m² (25 to 55.9 lb)
Not supported
55 - C130n User's Guide
2
)
2
)