Oki C130n Instruction Manual page 141

Symptom
Media is
misfeeding.
Cause
The media is not
correctly positioned in
the tray.
The number of sheets
in the tray exceeds
the maximum
allowed.
The media guides are
not correctly adjusted
to the media size.
Warped or wrinkled
media is loaded in the
tray.
The media is moist
from humidity.
Custom-sized media,
labels, postcards,
thick stock, or
letterheads are
loaded in Tray 2.
The recommended
label sheet is facing
the wrong way in Tray
1.
Unsupported media
(wrong size,
thickness, type, etc.)
is being used.
The media feed roller
is dirty.
141 - C130n User's Guide
Solution
Remove the misfed media and
reposition the media properly in the
tray.
Remove the excess media and reload
the correct number of sheets in the
tray.
Adjust the media guides in the Tray 1
to match the size of the media.
Remove the media, smooth it out, and
reload it. If it still misfeeds, do not use
that media.
Remove the moist media and replace it
with new, dry media.
Special media must be loaded in
Tray 1 only.
Load the label sheets according to the
manufacturer's instructions.
Use good quality recommended
media. See "Print Media" on page 53.
Clean the media feed roller.
For more details, refer to "Cleaning the
Media Feed Roller" on page 99.