Removing The Motherboard Assembly - Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual

Table of Contents

Advertisement

TeamPoS 3000 XL and XL
3.
To reinstall the rear panel, insert the metal tabs into the sides of the chassis and slide the
locking tabs down.
5.2

Removing the motherboard assembly

Caution: Be sure to observe all ESD precautions and power off procedures.
1.
Remove the back panel (See Section 5.1.2).
2.
Disconnect the AC power cord from the controller.
3.
Remove the front panel (See Section 5.1.1). The Yellow LED should be off. (See
Section 1.2).
4.
Remove hard disk drive shield by pushing in on the right side and pulling outward.
D900000145
2
Issue 3
Installation
5-4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Teampos 3000 xl2

Table of Contents