Replacing I/O Boards - Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual

2
TeamPoS 3000 XL and XL Maintenance

7.9 Replacing I/O boards

Caution: Be sure to observe all ESD precautions and power off procedures.
2
The following I/O board options are available on the TeamPoS 3000 XL and XL :
No I/O board.
Powered USB (One board with 3 powered USB ports).
Combo Board (One board with 6 powered USB ports, the Yosemite motherboard has only 5
powered USB ports, 1 RS 232 male and 1 15-pin).
Combo Board with COM Board (Combo board as shown above plus COM Board ports of 3
RS232, 2 male and 1 female) (M motherboard only).
Note: Combo board cannot be combined with single powered USB. The Combo board can be
purchased without the COM board, but the COM board cannot be purchased without the Combo
board.
Note: The powered USB board cannot be combined with the COM or the Combo board.
2
Note: The XL board does not support the COM board option.
D900000145 Issue 3 7-29