Stacking The Printers; Stacking The Dt50 Series Printer - Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual

2
TeamPoS 3000 XL and XL Installation

5.20. Stacking the Printers

Both the DT50 Series and the CT-10 printers stack on the TeamPoS 3000 controller and are
restrained from shifting by brackets attached to the controller. A filler is used to occupy the free
space on a standard control unit with a stacked LCD (either D22 or D25) and a DT50 Series
printer. The cable for the keyboard is threaded through the underside of the central filler and
therefore the keyboard is installed at the same time as the central filler.
5.20.1.

Stacking the DT50 Series Printer

Notches on underside of
DT50 Series Printer Bracket
DT50 Series Printer
1. After installing the I/O board and the cable, the printer is ready to be stacked on the
2
TeamPoS 3000 XL or XL controller.
D900000145 Issue 3 5-80