Table of Contents
Advertisement
TeamPoS 3000 XL and XL
9. Adjust the pole to the desired height and tighten locking collar in a clockwise direction.
To adjust the height of the pole, turn the locking collar in a counter clockwise direction to
loosen, adjust the length of the pole and tighten the locking collar again.
10. Pop the circular filler out of the LCD stand and discard.
11. Thread the cable through the opening in the stand and attach the pole with the four screws
provided. This will be easier to do if the cosmetic collar is taped to the pole to keep it out
of the way while attaching the screws.
D900000145
2
Issue 3
Installation
Removal of round
cosmetic cover reveals
screw holes for VF60
VF60 attached by
four screws
5-70
Hide quick links:
Advertisement
Table of Contents
