Table of Contents
Advertisement
TeamPoS 3000 XL and XL
6.
The CD/DVD drive comes already mounted onto a bracket. Align the slots in the
mounting bracket so that they pass over the hook tabs on the chassis. Slide the CD/DVD
drive forward so that it fits into the opening in the chassis and the holes in the bracket are
aligned with the holes in the chassis. Attach the bracket to the chassis with the two
screws retained in Step 5 above.
Hook Tabs
7.
The power cable and ribbon cable come attached to the back of the CD/DVD drive.
Attach the other end of the white power cable to the motherboard as shown in the photo.
5-16
2
Issue 3
Installation
White Power
Connector
Ribbon Cable
Goes Here
D900000145
Hide quick links:
Advertisement
Table of Contents
