Table of Contents
Advertisement
TeamPoS 3000 XL and XL
6. Remove the metal mount with the old CD/DVD drive attached by unscrewing the 2
screws holding it in place. Retain the screws.
Mounting
Screws
7. The replacement CD/DVD drive comes already mounted onto a bracket. Align the slots
in the mounting bracket so that they pass over the hook tabs on the chassis. Slide the
CD/DVD drive forward so that it fits into the opening in the chassis and that the holes
in the bracket are aligned with the holes in the same chassis. Attach the bracket to the
chassis with the two screws retained in #5 above.
Hook Tabs
D900000145
2
Issue 3
Maintenance
Power
Connectors
7-23
Hide quick links:
Advertisement
Table of Contents
