Super Io Feature Setup - Xl - Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual

TeamPoS 3000 XL and XL
10.1.14. Super IO Feature Setup – XL
All options are shown here, however on the BIOS screens it will be necessary to scroll down to
see all the options:
Factory Default Settings
Main Advanced
Serial port A:
Base I/O address:
Interrupt:
Serial port B:
Base I/O address:
Interrupt:
Serial port C:
Base I/O address:
Interrupt:
Serial port D:
Base I/O address:
Interrupt:
Powered COM1 Configuration
Powered COM2 Configuration
PS/2 Mouse Support
 Console Redirection
COM Port Address
BAUD Rate
Console Type
Flow Control
Continue C.R. After Post
F1 Help
Esc Exit
D900000145
2
Phoenix TrustedCore™ Setup Utility
Security
Super IO Feature
[Enabled]
[3F8]
[IRQ 4]
[Enabled]
[2F8]
[IRQ 3]
[Enabled]
[3E8]
[IRQ 6]
[Enabled]
[2E8]
[IRQ 7]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[19.2K]
[PC ANSI]
[None]
[ OFF]
 
Select Item
 
Select Menu
Issue 3
2
Motherboard
TPM State Power
-/+ Change Values
Select  Submenu
Enter
2
BIOS XL Motherboard
Boot Exit
Item Specific Help
F9 Setup
Defaults
F10 Save and Exit
10-13