Stacking The Ct10 Printer - Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual

TeamPoS 3000 XL and XL
5.20.2.

Stacking the CT10 Printer

CT10 Printer Bracket
Note lip & tabs
Front Filler Bracket
1. Install Central Filler (See Section 5.17.2)
2. Install narrow Side Filler by placing it on the chassis with the front edge aligned with
the Central Filler and ½" to the left of the Central Filler (facing the front of the unit).
3. Slide to the right.
Printer Bracket
Front Filler Bracket
(tabs hook toward back)
D900000145
2
Side Filler Bracket
(Identical to Central
Filler Bracket)
Central Filler
Side Filler
Issue 3
Central Filler
Bracket
LCD
Installation
Bottom of CT10
Printer
CT10 Printer Bracket
Tabs fit in these slots.
Rear of CT10 Printer
fits against rear lip.
5-82