Table of Contents
Advertisement
TeamPoS 3000 XL and XL
7.12 Replacing the Power Supply Fan
1. Remove the back panel (See Section 5.1.2).
2. Disconnect the power cable from the controller.
3. Remove the front panel (See Section 5.1.1). The yellow LED light should be off (See Section
1.2).
4. Unseat the motherboard.
5. Remove the backplane assembly (See Section 7.8).
6. The power supply fan can be replaced without removing the power supply (although there is
more room to maneuver with the power supply removed).
7. Remove the two screws holding the power supply fan to the power supply.
Power Supply Fan
mounting screws
8. Remove the fan and disconnect it from the power supply by pulling gently on the small
white connector inside the power supply.
D900000145
2
Issue 3
Maintenance
7-55
Hide quick links:
Advertisement
Table of Contents
