Inching Mode During Embroidering (Forcible Hoop Movement) - Brother BES-1260BC Instruction Manual

Chapter 7 Operation of Machine

8-2 Inching Mode during Embroidering (Forcible Hoop Movement)

184
1. Press the jog switch
pressing the "STOP" switch
and "AJST" is displayed.
2. Press the jog switch
the hoop. "JOG" is displayed.
3. Press the "START" switch and press the jog
switch. The hoop moves to the direction of
the pressed switch.
START
Note)
4. Pressing the STOP switch
resets the inching mode.
5. Press the START switch
restarts embroidering.
BES-960BC BES-1260BC
while
to forcibly change
• Note that the forcible hoop movement will
produce deviation of embroidering by the
amount.
• If the hoop and material are deviated from
each other during embroidering, correct it
by using the jog switches.
STOP
START