Settings Menu - Brother BES-1260BC Instruction Manual

Chapter 6 Embroidering

Settings menu

Same Needle Bar
Same Speed Range
Speed Range
Head Operation Suspend
Hoop Feed Position
Embroidery Area
Embroidery Hoop
Thread Trimming
Boring
Thread Breakage Sensor
Automatic Step Back
Automatic Hoop Feed
End of Embroidery
Mending
Adjust
Default Settings
Show Setting
Load Setting
Save Setting
Load Hoop
Window menu
Cascade
Tile
Arrange Icons
124
Uses the same needle bar for all embroidering. (
Sets the head. ( page 143)
Defines the speed range. (
Cancels the head operation which is not halted on the machine side. (
Sets the hoop feed position. (
Sets the area for embroidering. (
Sets the type of embroidery hoop. (
Sets the inching and thread removal amount. (
Sets boring. ( page 150)
Sets operation of thread breakage sensor. (
Sets automatic step back count for thread breakage. (
Feeds hoop to the hoop feed position automatically after embroidering. (
Sets if the machine returns to the start point after end of embroidery. (
Sets details of mending. (
Sets the adjusting value. (
Resets changes of the machine setting to the default at the factory shipment. (
Shows the contents of settings. (
Loads the setting details. (
Saves the changed setting. (
Selects the hoop type. (
Cascades windows. ( page 137)
Tiles windows. ( page 137)
Align icons. ( page 139)
BES-960BC BES-1260BC
page 142)
page 144)
page 145)
page 146)
page 146)
page 149)
page 151)
page 154)
page 154)
page 157)
page 158)
page 159)
page 160)
page 144)
page 152)
page 152)
page 153)
page 156)