Selecting Data - Brother BES-1260BC Instruction Manual

Selecting Data

Transfer registered embroidery data to the machine controller or Embroidery data editor.
1.
Selecting DST and DSB data
1.
2.
3.
Double-click data, or click data and
The explorer exits automatically after transferring the selected data.
Double click DST or DSB data or click the data and click
The pattern image is displayed. To read the selected data, click "OK".
Set the number of feeds for trim. Select the number of settings and click
"OK".
The data is transferred and the explorer ends automatically.
BES-960BC BES-1260BC
Chapter 4 Selecting and Transferring Embroidery Data
.
.
71