Brother BES-1260BC Instruction Manual page 17

Chapter 1 An Introduction of Embroidery Machine
Selection of Menu
Processing of software is carried out by giving a command. A command can be
given by the mouse as described below:
1.
2.
22
Move the arrow pointer to a menu name and click there.
A list of commands is displayed. Click the required command.
The check mark ( )
indicates that the
command is selected.
When the arrow pointer is moved to another menu while a list of commands is displayed, those
of the latter menu are displayed.
BES-960BC BES-1260BC
Dimmed commands
cannot be used unless
an appropriate item is
selected.
Commands with a mark
have sub menus.