Mounting Of Table - Brother BES-1260BC Instruction Manual

2-4 Mounting of Table

Mounting of F table
w
q
w
1. Tentatively mount the F table guides U q and L w on both sides of the legs using two bolts
each.
2. Tentatively mount there F table supports F e on the leg front using two bolts each.
3. Tentatively mount five F table stoppers r on the rear legs using two bolts each.
Note) • The steps 1 and 3 are required only when the F table set is purchased separately from the machine.
• The F table is a standard attachment.
q
r
e
BES-960BC BES-1260BC
Chapter 2 Preparation of Embroidery Machine
e
w
q
33