Replacement Of Bobbin - Brother BES-1260BC Instruction Manual

3-2 Replacement of Bobbin

Note) Remove dust, lint and oil from the bobbin case before replacement.
Removing bobbin case
w
q
Replacing bobbin
Attaching bobbin case
w
q
e
Pull out by about
50 mm
t
r
BES-960BC BES-1260BC
Chapter 2 Preparation of Embroidery Machine
1. Open the rotary hook cover B q.
2. Hold the knob w and take out the bobbin
case.
3. Close the knob and take out the bobbin e.
1. Put a new bobbin in the bobbin case.
2. Slide the thread under the tension spring
t through the notch r.
3. Pull out the thread from the hole of the
tension spring t.
4. Pull out the thread by about 50 mm.
1. Hold the knob w and attach the bobbin
case securely.
2. Close the rotary hook cover B q.
47