Chapter 5 Editing Embroidery Data
Chooses whether or not the needle pevetration positions are displayed.
1.
Displays start and end points as "S" and "E" on the screen respectively.
If points "S" and "E" are identical, "E" has priority over "S".
1.
Displays the position of the trim code and the pause code.
Trim is displayed by
1.
98
Needle Penetration
Select [Needle Penetration] from View menu.
Before selecting
Embroidering Start/End
Select [Embroidering Start/End] from View menu.
Before selecting
Trim and pause
Select "Trim and pause" from the "View" menu.
BES-960BC BES-1260BC
and pause is displayed by
After selecting
After selecting
.