Brother BES-1260BC Instruction Manual page 16

Names of Screen Components
Names of major components on the screen of the machine controller are described
below:
Menu
Tool bar
Dimmed icons cannot
be used unless an
appropriate item is
selected.
Leftward movement
Menu
Processing of software is carried out by giving relative commands.
Commands are divided in groups and stored in each menu. The menu displayed
on the screen changes depending on the program which is currently active.
Tool bar
A command is executed by clicking a relative icon (illustrated button) on the
screen. If it is hard to recognize icons from illustrations, move the white arrow
pointer to the icon. The name of the icon is displayed.
Scroll bar, scroll box, and scroll arrow
Some patterns may not be displayed entirely on the screen. Use the scroll bar to
see hidden parts of the pattern into view.
When displaying the right part, for example, click the scroll arrow at the right end.
The box in the scroll bar moves to the right. By dragging the scroll box to the
right, the screen can scroll quickly.
The vertical scroll bar can be used in the same way.
Status bar
This bar is for displaying a brief description of the selected command.
Status bar
BES-960BC BES-1260BC
Chapter 1 An Introduction of Embroidery Machine
Upward
movement
Scroll bar
Downward
movement
Rightward movement
21