Inching Mode; Inching Mode During Embroidering (Forcible Hoop Movement) - Brother BE-0901E-AC-PC Instruction Manual

8. Inching Mode

8-1 Inching Mode during Embroidering (Forcible Hoop Movement)

• Moving the frame greatly in the inching mode may cause an interference with the machine.
Pay utmost care in the inching mode.
• Although the distance of the frame moved in the inching mode is stored even after turning OFF the power,
if the power is turned ON again and sewing is started, the pattern may be embroidered in a different
position. Be sure to use the inching mode appropriately.
1. Press . while pressing
2. Press and press the
• Note that the forcible hoop movement will produce deviation of embroidering by the amount.
• If the hoop and material are deviated from each other during embroidering, correct it by using the jog
switches.
3. Pressing resets the inching mode.
4. Press restarts embroidering.
W1376Q
, "Jog" is displayed.
. The hoop moves to the direction of the pressed switch.
BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 7 Operation of Machine
W1282Q
7-9