Fluke 1529 User Manual page 87

Command
FORMat:STAMp?
FORMat:STAMp <bool>
INITiate
INITiate:CONTinuous?
LOGging:AUTomatic:COUNt? [MIN|MAX|DEF]
LOGging:AUTomatic:COUNt <num> |MIN|MAX|DEF
LOGging:AUTomatic:DELete [<num>|ALL]
LOGging:AUTomatic:FREE?
LOGging:AUTomatic:LABel? [MIN|MAX|DEF]
LOGging:AUTomatic:LABel <num> |MIN|MAX|DEF
LOGging:AUTomatic:POINt? [MAX]
LOGging:AUTomatic:PRINt [<num>|ALL [,port]]
LOGging:AUTomatic:STATus?
LOGging:AUTomatic:STATus <bool>
LOGging:AUTomatic:TIMe? [MIN|MAX|DEF]
LOGging:AUTomatic:TIMe <num> |MIN|MAX|DEF
LOGging:AUTomatic:VALue? <num> |MIN|MAX|DEF
LOGging:DEMand:DELete [<num>|ALL]
LOGging:DEMand:FREE?
LOGging:DEMand:LABel? [MIN|MAX|DEF]
LOGging:DEMand:LABel <num> |MIN|MAX|DEF
LOGging:DEMand:POINt? [MAX]
LOGging:DEMand:PRINt [<num>|ALL [,<port>]]
LOGging:DEMand:STORe
LOGging:DEMand:VALue? <num> |MIN|MAX|DEF
LOGging:LABel<n>:NAME?
LOGging:LABel<n>:NAME <label>
MEASure? [<chn>]
READ? [<chn>]
ROUTe:CLOSe? <chn>
ROUTe:CLOSe <chn>
ROUTe:OPEN? <chn>
ROUTe:OPEN <chn>
ROUTe:SCAN?
ROUTe:SCAN [<chn list>]
Description
Returns the extended measurement data format setting
Enables extended measurement data format with the
FETCh?, MEASure?, and READ? commands
Provided for compatibility but has no effect
Provided for compatibility but has no effect
Returns the number of entries to auto log
Sets the number of entries to auto log
Deletes auto log entries
Returns the number of log entries free and stored
Returns the current auto log label number
Sets the current auto log label number
Returns the number of auto log entries
Prints stored auto log data
Returns the auto log status
Sets the auto log state
Returns the auto log interval setting
Sets the auto log interval setting
Returns an auto log reading
Deletes demand log entries
Returns the number of log entries free and stored
Returns the current demand log label number
Sets the current demand log label number
Returns the number of demand log entries
Prints the demand log data
Stores the current measurement into the demand log
Returns a demand log entry
Returns the name of the specified label
Sets the name of the specified label
Returns the most recent measurement on the specified
channel
Returns the most recent measurement on the specified
channel
Returns the state of the specified channel
Enables the specified channel
Returns the state of the specified channel
Disables the specified channel
Returns the list of enabled channels
Sets the input channels for scanning
8 Digital Communications Interface
Interface Commands
Refer To
Section 8.4.1
Section 8.4.1
Section 8.4.2
Section 8.4.2
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.7
Section 8.4.1
Section 8.4.1
Section 8.4.3
Section 8.4.3
Section 8.4.3
Section 8.4.3
Section 8.4.3
Section 8.4.3
81