Lpd Setup Overview; Step 1. Set Up Ip Parameters; Step 2. Set Up Print Queues; Step 3. Print A Test File - HP Jetdirect 640n Administrator's Manual

Jetdirect firmware v.45
Hide thumbs Also See for Jetdirect 640n:
Table of Contents

Advertisement

HARDWARE
In this examle, x is a hexadecimal digit (for example, 0001E6123ABC).
IP address configured on the HP Jetdirect print server.

LPD setup overview

To configure the HP Jetdirect print server for LPD printing, complete the following:
1.
Set up IP parameters.
2.
Set up print queues.
3.
Print a test file.
The following sections provide detailed descriptions for each step.

Step 1. Set up IP parameters

To set up IP parameters on the HP Jetdirect print server, see

Step 2. Set up print queues

Set up a print queue for each printer or printer personality (PCL or PostScript) you use on your
system. Different queues are required for formatted and unformatted files. The following table lists the
supported queue types and how the line HP Jetdirect printer daemon server processes each.
Table A-2
Supported queue types
raw, raw1, raw2, raw3
text, text1, text2, text3
auto, auto1, auto2, auto3
binps, binps1, binps2, binps3
<user-defined>

Step 3. Print a test file

Print a test file using the LPD commands. For instructions, see the information provided for your
system.
ENWW
ADDRESS: xxxxxxxxxxxx
No processing. Treats the data in the queue as a print job already formatted in
the PCL, PostScript, or HP-GL/2 and sends it to the printer without
modification.
Carriage return added. Treats data in the queue as unformatted or ASCII text,
and adds a carriage return to each line before sending to the printer.
Automatic. Uses auto-sensing to determine whether the print data is sent as
raw or text.
Binary PostScript. Instructs the PostScript interpreter that the print job is
binary PostScript data.
(Full-featured print servers only) Define pre and post-print data strings, which
can include job control commands that are automatically added before or after
the print job. You can set up print queues using Telnet or the HP Embedded
Web Server.
TCP/IP configuration on page
LPD setup overview 167
15.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jetdirect 695nwJ8025aJ8024aJetdirect 695n

Table of Contents