HP Jetdirect 640n Administrator's Manual page 78

Table 4-2 Networking Menu Items
CONFIGURATION section
●
Wireless Station on page 68
●
TCP/IP Settings on page 74
●
Network Settings on page 81
●
Other Settings on page 85
●
Select Language on page 90
SECURITY section
●
Security: Settings on page 90
●
Authorization on page 93
●
Mgmt. Protocols on page 98
●
802.1X Authentication on page 100
●
IPsec/Firewall on page 102
DIAGNOSTICS section
●
Network Statistics on page 103
●
Protocol Info on page 103
●
Configuration Page on page 103
Wireless Station
NOTE: You can use HP Jetdirect wired/wireless print servers in a wired or wireless networking
environment. To specify the connection type, see
Use the Wireless Station pages to create or change your wireless ad hoc or infrastructure
configuration parameters for your IEEE 802.11 wireless Ethernet connection.
The configuration parameters are summarized in
on page 69.
The Wireless Station page displays all wireless configuration parameters required to make a
wireless connection to your network. Click Apply to set, or Cancel to ignore, your configuration
entries. To reset to factory-default values, click Restore Defaults.
Alternatively, you can click the Wireless Wizard button in the General section of the Wireless
Station page to configure your wireless network connection. This launches a configuration wizard
that guides you through the required 802.11 wireless configuration parameters and, depending on
your choices, bypasses unnecessary parameters.
NOTE: If you improperly exit the wizard, for example by failing to use the Cancel button, an
Operation Failed screen might appear. If so, wait approximately two minutes before restarting the
wizard.
An HP Jetdirect wireless print server with factory-default settings (ad hoc mode) is easily accessible
by unauthorized clients. Therefore, do not turn on a print server with factory default settings any
longer than necessary. Ensure that you verify any configuration settings.
68 Chapter 4 HP Embedded Web Server (V.45.xx.nn.xx)
Misc. Settings on page
Table 4-3 Wireless Station configuration parameters
85.
ENWW