Disable An Hp Jetdirect Embedded Print Server (V.45.Xx.nn.xx) - HP Jetdirect 640n Administrator's Manual

Disable an HP Jetdirect embedded print server (V.
45.xx.nn.xx)
NOTE: You can disable HP Jetdirect EIO and external print servers by disconnecting them from the
printer/MFP.
You can disable an HP Jetdirect embedded print server by using the printer/MFP Service menu. This
can help you isolate faults to either the printer or the print server. To disable the print server, use the
following steps:
1. Turn the printer on and watch for the memory count to begin.
2.
Press and hold the Select
three control panel lights (Ready, Data, Attention) blink and then remain on.
3.
Release the Select
4. Press the down arrow
5.
Press the Select
its turn-on sequence.
6. Verify whether the printer/MFP properly completes its turn-on sequence.
To enable the embedded print server, use the same instructions except select Embedded LAN
enable in step 4.
128 Chapter 7 Troubleshoot the HP Jetdirect print server

button (or the 6 button on MFPs with numeric keypads) until the

button (or 6 button). The control panel displays Select.
M button (or 9 button) until Embedded LAN disable appears.

button (or 6 button) to disable the embedded print server and then continue
ENWW