HP Jetdirect 640n Administrator's Manual page 82

Table 4-3 Wireless Station configuration parameters (continued)
Item
WPA (WiFi Protected Access)
WPA–Personal
72 Chapter 4 HP Embedded Web Server (V.45.xx.nn.xx)
Description
Your network uses WPA. Choose WPA–Personal, which uses a pre-shared key typically
generated by a passphrase. Or, select WPA – Enterprise which is commonly used in
enterprise-level networks. A dedicated server verifies the identity of a user or device
requesting access to the network before granting that access.
Select the WPA Version (Auto, WPA, or WPA-2), and then select the Encryption,
using Auto, advanced encryption standard (AES), or temporal key integrity protocol
(TKIP).
Choose WPA–Personal, which uses a pre-shared key typically generated by a
passphrase. You can also directly enter the pre-shared key.
Enter the Passphrase to use when generating the pre-shared key for WPA–Personal
authentication on your network. The passphrase must be from 8 to 63 ASCII characters
in the hexadecimal range 21 through 7E (characters 0–9, a–z, A–Z and numerous
special characters including !, @, #, $, %, ^, &, (, ), _, +, =, −, {, }, [, ], \, /, ", <, >, ?, ", ',
˜).
Or, directly enter the pre-shared key. The pre-shared key must be 64 hexadecimal
characters in length (0 to 9, A to F, a to f).
NOTE: The default WPA passphrase for HP Jetdirect print servers is
hpSecureNetwork.
ENWW