HP Jetdirect 640n Administrator's Manual page 52

Jetdirect firmware v.45
Hide thumbs Also See for Jetdirect 640n:
Table of Contents

Advertisement

NOTE:
To view supported commands, formats, and parameters, type ?.
To list additional (or advanced) commands, type advanced before entering ?.
To display current configuration information, type /.
1.
At the > Telnet prompt, type the following and press Enter:
<command parameter>: <value>
The <command parameter> signifies the configuration parameter, and <value> is the value
assigned to that parameter. Follow each command entry with
See
Table 3-3 Telnet Commands and Parameters on page 42
2.
Repeat the previous step to set any additional configuration parameters.
3.
When you have finished setting the configuration parameters, type exit or quit (depending on
your system).
Indicate whether to save any changes by entering Y (default) for Yes, or N for No.
If you enter save instead of exit or quit, you are not prompted to save settings.
Telnet commands and parameters.
the available Telnet commands and parameters.
NOTE:
If a parameter is dynamically provided by a BOOTP or DHCP server, you cannot change its
value unless you set Manual configuration. See the ip-config command.
When you manually set an IP address, you should also re-set the subnet mask and default gateway.
Table 3-3
Telnet Commands and Parameters
Command
User Control Commands
?
/
menu
advanced
general
save
exit
export
General
42
Chapter 3 TCP/IP configuration
Table 3-3 Telnet Commands and Parameters on page 42
Description
Display the Help and Telnet commands.
Display current values.
Display the
Menu Interface on page 59
Enable advanced commands. Help (?) includes the advanced commands in the list.
Disable advanced commands. Help (?) does not include advanced commands (default).
Save the configuration values and exit the session.
Exit the session.
Export the settings to a file for editing, and importing through Telnet or TFTP. (Only
available on systems that support input/output redirection, such as UNIX.)
Enter
(carriage return).
for configuration parameters.
for use of the configuration parameters.
lists
ENWW

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jetdirect 695nwJ8025aJ8024aJetdirect 695n

Table of Contents