Universal Setup menu
Use
Units of Measure
Inches
Millimeters
Portrait Width
3–8.5 inches
76–216 mm
Portrait Height
3–14.17 inches
76–360 mm
User's Guide
To
Identify the units of measure.
Notes:
•
Inches is the US default setting.
•
Millimeters is the Non-US default setting.
Set the portrait width.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
8.5 inches is the US default setting. You can increase the width in
0.01-inch increments.
•
216 mm is the Non-US default setting. You can increase the
width in 1-mm increments.
Set the portrait height.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
14 inches is the US default setting. You can increase the height
in 0.01-inch increments.
•
356 mm is the Non-US default setting. You can increase the
height in 1-mm increments.
- 90 -