Konica Minolta bizhub 4000P User Manual page 115

Use
Blank Pages
Do Not Print
Print
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Source
Tray [x]
Multi-Purpose Feeder
Paper Saver
Off
2-Up
3-Up
4-Up
6-Up
9-Up
12-Up
16-Up
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
User's Guide
To
Specify whether to insert blank pages in a print job.
Note: Do Not Print is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
Specify whether to insert blank separator sheets.
Notes:
• Off is the factory default setting.
• Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to (1,1,1) (2,2,2). If Collate is set to (1,2,3) (1,2,3), then a
blank page is inserted between each set of printed pages, such as after all
page 2's and after all page 3's.
• Between Jobs inserts a blank sheet between print jobs.
• Between Pages inserts a blank sheet between each page of a print job.
This setting is useful when printing transparencies or when inserting blank
pages in a document.
Specify the paper source for separator sheets.
Note: Tray 1 (standard tray) is the factory default setting.
Print multiple-page images on one side of a paper.
Notes:
• Off is the factory default setting.
• The number selected is the number of page images that will print per side.
Specify the positioning of multiple-page images when using Paper Saver.
Notes:
•
Horizontal is the factory default setting.
• Positioning depends on the number of page images and whether they are
in portrait or landscape orientation.
- 115 -