Konica Minolta bizhub 4000P User Manual page 107

Use
Timeouts
Sleep Mode
Disabled
1–180min
Timeouts
Hibernate Timeout
Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Timeouts
Screen Timeout
15–300 sec
User's Guide
To
Set the amount of time the printer waits after a job is printed
before it goes into a reduced power state.
Notes:
• "30 min" is the factory default setting.
• "Disabled" appears only when Energy Conserve is set to
Off.
• Lower settings conserve more energy, but may require
longer warm-up times.
•
Select a high setting if the printer is in constant use. Under
most circumstances, this keeps the printer ready to print
with minimum warm-up time.
Set the amount of time the printer waits before it enters
Hibernate mode.
Note: "3 hours" is the factory default setting.
Set the amount of time in seconds the printer waits before
returning the display to the ready state.
Note: "30 sec" is the factory default setting.
- 107 -