Network Card Menu; Tcp/Ip Menu - Konica Minolta bizhub 4000P User Manual

Bizhub 4000p/4700p user guide
Hide thumbs Also See for bizhub 4000P:
Table of Contents

Advertisement

Network Card menu

To access the menu, navigate to either of the following:
Network/Ports >Standard Network >STD NET SETUP >Network Card
Use
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0–255 seconds
Banner Page
Off
On

TCP/IP menu

To access the menu, navigate to any of the following:
Network/Ports >Standard Network >STD NET SETUP >TCP/IP
Note: This menu is available only in network printers or printers connected to print servers.
User's Guide
To
View the connection status of the network card.
View the speed of an active network card.
View the network addresses.
Set the amount of time it takes for a network print job to be canceled.
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the timeout.
If a value of 1–9 is selected, then the setting is saved as 10.
Set the Banner Page.
Note: Off is the factory default setting.
- 94 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 4700p

Table of Contents