Too Many Flash Options Installed [58]; Too Many Trays Attached [58]; Unformatted Flash Detected [53]; Unsupported Option In Slot [X] [55] - Konica Minolta bizhub 4000P User Manual

Too many flash options installed [58]

1. Turn off the printer.
2. Unplug the power cord from the electrical outlet.
3. Remove the extra flash memory.
4. Connect the power cord to a properly grounded electrical outlet.
5. Turn the printer back on.

Too many trays attached [58]

1. Turn off the printer.
2. Unplug the power cord from the electrical outlet.
3. Remove the extra trays.
4. Connect the power cord to a properly grounded electrical outlet.
5. Turn the printer back on.

Unformatted flash detected [53]

Try one or more of the following:
• From the printer control, select Continue to stop the defragmentation and continue printing. Press
to confirm.
• Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and need to be replaced.

Unsupported option in slot [x] [55]

1. Turn off the printer.
2. Unplug the power cord from the electrical outlet.
3. Remove the unsupported option card from the printer controller board, and then replace it with a
supported card.
4. Connect the power cord to a properly grounded electrical outlet.
5. Turn the printer back on.

Weblink server not set up. Contact system administrator.

Select Continue to clear the message. Press
User's Guide
to confirm.
- 159 -