Saving Energy - Konica Minolta bizhub 4000P User Manual

Checking the status of parts and supplies from the Embedded Web Server
Note: Make sure the computer and printer are connected to the same network.
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Device Status >More Details.

Saving energy

Using Eco-mode
Use Eco-Mode to quickly select one or more ways to reduce your printer's environmental impact.
1. From the printer control panel, navigate to:
>Settings >
setting you want
Use To
Off Use the factory default settings for all settings associated with Eco-Mode. This setting supports
the performance specifications for your printer.
Energy Reduce energy use, especially when the printer is idle.
•
•
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper
•
•
2. Press .
>Settings > >General Settings >
Printer engine motors do not start until a job is ready to print. You may notice a short delay
before the first page is printed.
The printer enters Sleep mode after one minute of inactivity.
Enable the automatic two-sided (duplex) feature.
Turn off print log features.
User's Guide
- 62 -
>Eco-Mode > > select the