Accessing The Controller Board - Konica Minolta bizhub 4000P User Manual

Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the
area shown while actively printing. Loss of data or a malfunction can occur.
Use the
1 USB port
2 USB printer port
3 Ethernet port
4 Power switch
5
Printer power cord socket
6 Security slot

Accessing the controller board

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have any other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.
User's Guide
To
Attach an optional wireless network adapter.
Connect the printer to a computer.
Connect the printer to an Ethernet network.
Turn on or turn off the printer.
Connect the printer to an electrical outlet.
Attach a lock that will secure the printer in place.
- 34 -