Options Installed; Text Options; Banners - Konica Minolta bizhub 40P/40PX Reference Manual

Options Installed

Parameters
Duplex Unit
Finisher
Paper Source Unit
Printer Memory
Storage

Text Options

Parameters
Text Halftone

Banners

Parameters
Starting Banner
122
Settings
Select Enable if the optional duplexing unit
for the printer has been installed.
The default setting is Disable.
Select Enabled if the output tray unit ( fin-
isher) is installed. Select Disabled if it is not
installed.
The default setting is Disabled.
Select Unit 3 or Unit 3 + Unit 4 if the optional
trays for the printer have been installed.
The default setting is Disable.
Select 128 MB, 256 MB or 384 MB if the
optional memory for the printer has been
installed.
The default setting is 128 MB.
Select None, CF (1GB Under), CF (1GB
Over) or HDD for the storage unit that is
installed.
The default setting is None.
Settings
Specifies the halftone for text as Line Art,
Detail, or Smooth.
The default setting is Line Art.
Settings
Specifies the starting banner as none, clas-
sified, confidential, secret, standard,
topsecret, or unclassified.
The default setting is none.
Specifying Printer Driver Settings