Options Installed; Simulation Profile - Konica Minolta Magicolor 5450 Reference Manual

Options Installed

Parameters
Printer Memory
Duplex Unit
Hard Disk
Paper Source Unit

Simulation Profile

Parameters
Simulation Gray Treatment Specifies simulation gray treatment as Com-
Match Paper Color
Simulation Profile
Specifying Printer Driver Settings
Settings
Select 256MB, 512MB, 768MB, or 1024MB if
the optional memory for the printer has been
installed.
The default setting is 256MB.
Select Enable if the optional duplexing unit
for the printer has been installed.
The default setting is Disable.
Select Enable if the optional Hard Disk for
the printer has been installed.
The default setting is Disable.
Select Unit 3 or Unit 3 + Unit 4 if the optional
trays for the printer have been installed.
The default setting is Disable.
Settings
posite Black, Black and Gray, or Black
Only.
The default setting is Composite Black.
Specifies the Match Paper Color.
The default setting is OFF.
Specifies the simulation profile as None,
SWOP, EuroScale, CommercialPress, DIC,
or TOYO.
The default setting is None.
83